Prep-Center

Intended Use

The Prep-Center is designed for small batch preparation. A cost effective drive unit that can accommodate any Brabender Mixer/Measuring Head and/or Extruder Attachment.


Prep-Center

  • raw material and recipe development
  • material testing
  • quality control parallel to production
  • optimization of the production process
  • laboratory-scale production of samples for further testing

 

You have a specific type of problem or need a special configuration?

Contact us

We will gladly answer your questions. Please complete all information in the fields below. We will contact you as soon as possible.

I accept the terms of the privacy policy.

 

All fields marked with * are required.


Prep-Center

The Prep-Center features a 5.0 HP Vector Drive with a 2-Stage Helical Bevel gear reducer, variable speed 2 -150 RPM with electronic torque overload (24,000 Mg) protection, soft touch digital keypad for manual speed control with reverse/jog, and digital RPM and AMP readout. The Standard unit is mounted on a heavy duty mobile floor stand, with locking foot brake, or can be supplied as a table top model.

The temperature control console is a separate unit with PID controls that allow the instrument to operate with simultaneous heating/cooling functions in order to maintain accurate control over the processing conditions. The unit can also be equipped with melt temperature and pressure indicators to simulate production environments, and recording capabilities.

Since the Prep-Center can accommodate any Brabender mixer/measuring head and/or extruder attachment, it is a necessity for any laboratory or pilot plant. The numerous interchangeable combinations of mixers and extruders present dependability and savings in terms of time and economic cost. C.W. Brabender offers an extensive line of mixers designed to simulate production characteristics, and various single screw and twin screw extruders for processing applications.

Power5.0 hp
Speed Range2...150 rpm
Speed Deviation0% through digital feedback
Torque Overload240 Nm (24,000 Mg)
Power Requirements208/230V 60 HZ, 3 Phase, 16 amps
Dimensions* (W x H x D)22" x 48" x 40"
Table-Top22" x 13" x 40"

*Console Dimensions: 7" x 19"
Consult manufacturer for temperature control information

CWB Prep-Center

Top