Segmented Twin Screw Extruder 20mm Clamshell

Intended Use

The Stand-alone Extruder TSE 20/40 is part of a new generation of compounding systems that will offer a high degree of operating reliability for the compounding of various polymers.


20mm Clamshell Segmented Twin Screw Extruder

The TSE 20/40 is available with barrel lengths of 20 or 40 D. Metering and/or venting ports are located at 10 D, 20 D, and 30 D with side feeding capabilities (12 D and 22 D). Furthermore, the barrel of the TSE 20/40 is divided horizontally, and can be tilted open on both sides. Allowing visual assessment of individual processing steps. Ideally suited for Research and Development applications.

  • 20mm Parallel
  • Clam Shell Barrel
  • Co-rotating Side Feeding Ports
  • Segmented Screw Elements
  • CAN Bus Communication 

 

You have a specific type of problem or need a special configuration?

Contact us

We will gladly answer your questions. Please complete all information in the fields below. We will contact you as soon as possible.

I accept the terms of the privacy policy.

 

All fields marked with * are required.


Clamshell barrel - Segmented Screws

The Stand-alone TSE 20/40 Extruder is a self-contained twin-screw extrusion system. The self-reliable unit is equipped with a 12kW inverter drive. The advantage of the integrated motor, allows the system to reach a higher rotary speed (max. 1200 rpm) than a Twin Screw Extruder powered by a drive-unit. The design and persuasive features make the TSE 20/40 Extruder a perfect solution for laboratory applications.

The unit utilizes the latest technology in CAN Field-Bus data communication. The Stand-alone Extruder TSE 20/40 is part of a new generation of compounding systems that will offer a high degree of operating reliability for the compounding of various polymers.

The processing unit is a clamshell design with segmented screws. The modular screw design enables the operator to optimize the compounding application by utilizing various kneading, mixing, and shear elements of the screws. The segmented screw elements are interchangeable and can be realigned to adapt to a specific application.

Diameter20 mm
Screw Length L/D40
Flight Depth3.75 mm
Drive Power12 kW (16 Hp)
Screw Speed (RPM)up to 1200
Screw Torque2 x 40 Nm
Operating Temperature400 °C

CWB Twin Screw Extruder TSE 20/40

Top